Tricking out your AK is easy when you have cool stuff to choose from like ergonomic pistol grips, quad-rails to hang accessories, mounts for optics, and stocks—and there are a ton of styles and types made from a variety of materials by companies like Ace Ltd., Stark, Archangel, Magpul and more. Customizing your AK to your shooting style has never been so simple. Continue reading to see our list of 20 new AK accessories to look out for in 2014.
Ace AKFX Skeleton Stock
Ace Ltd’s AKFX skeleton stock is made from solid aluminum billet, oxidize-blasted and then given a hard anodized finish. The AKFX will work for all common milled AK receivers, including Bulgarian, Arsenal and Chinese models. The stock includes either a 0.5- or 1-inch recoil pad.
For more information, visit riflestocks.com or call 888-736-7725.
Archangel OPFOR AK Pistol Grip
The AA121 OPFOR AK pistol grip from Archangel is designed to fit all AK variants. It is ergonomically designed for comfort and weapon control. Made of a carbon-fiber polymer, the front and rear straps are ribbed, and the side panels are textured. A storage compartment is accessible from the butt.
- This pistol-grip is Made In The USA, and includes all mounting hardware
- Fits all AK’s
- Designed for comfort and control
- Grip storage
- Available in Black (AA121), Desert Tan (AA121-DT), and Ranger Green (AA121-RG)
- 922® Compliant
For more information, visit archangelmanufacturing.com or call 800-438-2547.
Buffer Technologies AK Buffer
The easy-to-install AK Buffer from Buffer Technologies fits on the recoil spring guide rod of any AK-style platform rifle including AKs, Valmets, Galils and Saigas. The buffer helps reduce the wear on the operating mechanism as well as perceived recoil.
For more information, visit buffertech.com or call 877-628-3337.
Century SB-47 Stabilizing Brace
The SB-47 stabilizing brace from Century International Arms fits a variety of PAP, Draco and C39 AK-style pistols. It secures to a shooter’s forearm with two straps with quick-release buckles to help reduce recoil and increase your accuracy when shooting with one hand.
For more information, visit centuryarms.com or call 800-527-1252.
FAB Defense AGR-47 Grip
The new AGR-47 pistol grip for AK-style rifles by FAB Defense features three overmolded rubber textures: rib studded, alligator pattern and moon surface. All help give operators a sure grip even with wet or sweaty palms. The AGR-47 is available in three colors: black, olive green and desert tan.
- MIL-SPEC Reinforced Polymer Composite with Muti-Textured Rubber Overmold Superior Coating
- Three Different Rubber Overmolded Style Textures; Rib Studded at Palm, Alligator Pattern for front Fingers and Moon Surface Textured Sides
- Multi Rubber Texture Provides Superior Comfort; Adds Appropriate Ventilation, Prevents Slip and Reduces Sweaty Palms
- Finger Swelts and a Backstrap Shape Design Provides Enhanced Grip, Even when Wet
- Extended Beavertail for Better Control, Allowing a Higher Firmer Hold
- Readily Accessible Storage Area with Securely Sealed Hinged Door
- Compatibility: AK-47/74, AKS-74U ‘Krinkov’, Galil Models
For more information, visit fab-defense.com.
FAB Defense Ultimag AK 10R
FAB Defense’s Ultimag AK 10R magazine is made of high-grade polymer that is durable, reliable and lightweight. The ergonomic design of this 10-round magazine makes for faster reloads. It is available in three colors: black, olive green and desert tan.
- Ergonomic design made for enhanced grip and faster magazine change
- Dissembled by hand, no tools needed
- Made of durable, light weight, polymer composite and steel
- Highly reliable construction, built to last
- Compatibility: 7.62×39 AK Models and variants
For more information, visit fab-defense.com.
FosTech Bumpski Stock
The FosTech Bumpski stock allows a shooter to rapidly fire in semi-auto mode while simulating automatic weapon fire. The stock is made of aluminum with a polymer finger-groove pistol grip, and will work with AK-47s, AK-74s and Saiga shotguns.
For more information, visit fostechoutdoors.com or call 812-524-7279.
GG&G AK Quick Detach Scope Mount
The AK Quick Detach Scope Mount from GG&G features a 6-inch Picatinny rail for mounting optics. It attaches to most AK variants that have a built-in receiver scope rail interface. The mount is guaranteed to keep your optic within 0.5 MOA when it’s removed and reattached.
Attaches to most AK variants with a built in receiver scope rail interface.
- Scope mounting dovetail rail meets MIL-SPEC-1913.
- The AK-ucam QD adjustable locking mechanism is shown to have 1/2moa return to zero or less when re-installed properly on to the AK scope rail.
- QD system allows for easy attachment, removal and re-attachment.
- The AK-ucam lever is serrated on the bottom finger pad to facilitate a secure grip when unlocking the quick detach mechanism.
- The GG&G AK-ucam QD System is fully adjustable for a worn or out of tolerance AK side rail.
- The scope mount is precision machined from 6061-T6 billet aluminum.
- The AK-ucam Quick Detach mechanism is manufactured from heat treated 4130 steel.
- All edges are smoothed and rounded for the shooter’s safety.
- Finish: Aluminum Body is Type III hard coat anodized in a non-reflective matte black finish per Mil-Spec.
- Steel parts are manganese phosphated matte black per Mil-Spec.
- Rail Length: 6 1/8″.
- Weight: 8.4 oz.
- Lifetime warranty.
For more information, visit gggaz.com or call 800-380-2540.
GM Gear AK-47 Quad Rail
The heavy-duty aluminum AK-47 Quad Rail from GM Gear offers a forward-extended top rail that is well suited for reflex sights and optics. It fits most AK-style rifles, and the side rails offer attachment points for accessories like laser sights and tactical lights.
For more information, visit gm-gear.com.
GuntecUSA Saiga M4 Stock
GuntecUSA’s Saiga drop-in replacement M4 stock with Gen 2 stock adaptor gives an operator an adjustable six-position stock and a polymer grip. The kits works with all Saiga rifles and shotguns. The stock kit is available in black, OD green and desert tan.
- Metal Stock Adapter & Stock Tube
- QD Swivel Bult Into Stock Adapter
- Fits Stamped Receivers
- Drop In Replacement For Hunting Style Stock
- All Hardware Included
- Ergonomic Polymer Pistol Grip
- M4 Six Position Stock
- Lightweight
- Desert Tan, Black , O.D. Green, and Dark Earth Stock Shell
- Works With All Saiga Rifle Calibers, Also Works With Saiga 12
For more information, visit guntecusa.com or call 480-478-4517.
Hawke Laser/Light Foregrip
The HK3522 laser/LED vertical foregrip from Hawke Sport Optics was designed to improve a weapon’s handling during fire and provide enhanced aiming capabilities via the red laser and LED light. Made of rugged yet lightweight aluminum, the grip has a knurled textured and a built-in clamp that fixes to any Picatinny-style rail.
- High performance LED
- 150 Beam
- Strobe mode
- Quick & easy to attach
For more information, visit hawkeoptics.com or call 877-429-5347.
Magpul PMAG 30 AK/AKM MOE
Magpul’s PMAG 30 AK/AKM MOE is a 30-round magazine made from lightweight, rugged polymer that’s designed to work in most AK-style rifle platforms. A large grid texture covers the outside surfaces, and it uses a low-friction follower.
- Impact and crush resistant all polymer body
- Constant-curve internal geometry for smooth feeding
- Anti-tilt, self-lubricating follower for increased reliability
- Long life stainless steel spring
- Ribbed gripping surface and aggressive front and rear texture for positive magazine handling
- Paint pen dot matrix panels on the bottom of the body to allow for identification marking
- Flared floorplate aids magazine handling and disassembly yet is slim enough for use with most pouches
For more information, visit magpul.com or call 877-462-4785.
MFT Engage EPG47 Pistol Grip
The Mission First Tactical (MFT) Engage EPG47 tactical pistol grip replaces the standard AK grip with textured finger swells and a grooved backstrap. A watertight storage compartment uses a plug for retention, and it can be accessed one-handed.
- Designed for AK47
- Full sized pistol grip replaces thinner original for a full-fisted hold
- Grip angle replicates M16 while not affecting trigger contact
- Finger swells and grooved backstrap provide a non-slip grip
- Secure watertight storage compartment
- Plug retention for one handed storage access
- Customizable foam storage block with quick access tab diminishes rattle
For more information, visit missionfirsttactical.com or call 267-803-1517.
MFT Engage EPGI47 Grip with Interchangeable Backstraps
The Engage EPGI47 AK replacement grip from Mission First Tactical mimics the grip angle of an AR rifle and features three interchangeable finger swells and three backstraps to provide a custom fit for any hand size.
- Designed for AK47
- Any combination of interchangeable backstraps and finger swells
- Provides custom fit for any sized hand
- Grip angle replicates M16 while not affecting trigger contact
- Secure watertight storage compartment
- Customizable foam storage block with quick access tab diminishes rattle
For more information, visit missionfirsttactical.com or call 267-803-1517.
Midwest Industries AK-SSK KeyMod Handguard
The Midwest Industries (MI) AK-SSK KeyMod handguard fits most AK variants, whether the receiver is milled or stamped. A Picatinny rail is located along the top. The AK-SSK is lightweight and rugged, and it’s made in the U.S.A. from 6061-T6 aluminum and is finished with a black hardcoat anodizing.
- Installs in minutes using nothing but the wrenches provided with the kit, no gunsmithing required
- Includes one Key Mod rail section
- Features five anti-rotation QD sockets for push button swivels
- Topcover features quality T-marked MIL-STD 1913 rails for lights, lasers and optics
- Lightweight, rugged construction of 6061 aluminum, hard coat anodized for a lifetime of service
- Weighs in at only 8.7 ounces
- The highest quality, most affordable AK handguard on the market
- Lifetime warranty
- 100% made in the U.S.A.
For more information, visit midwestindustries.com or call 262-896-6780.
Stark SE-1 AK Grip
Stark Equipment Corp. has adapted its original SE-1 AR grip for the AK platform. The SE-1 AK pistol grip offers the same ergonomic features of Stark original grip but for standard AK-47 rifles. The grip features a patented hand-stop, a unique grip angle, a storage compartment and an ArmorSoft coating.
For more information, visit starkequipment.com or call 603-556-7772.
Strike Industries AK Rear Sight Rail
Strike Industries offers an AK kit that converts the rear sight into a 1913 Picatinny rail for mounting low-profile reflex and red dot sights. It can be adjusted for elevation and windage. Manufactured from 6061 aluminum, it has a hardcoat anodized black finish.
- AK Rear Rail
- 3 M3 Countersunk Hex Socket Screws
- 1 M3 Oval Head Screw – 1 M3 Nut
- Quick 1 step installation
- Customizable Level Adjustment (up/down, left/right)
- Aircraft 6061 Aluminum with hard coat anodize
- Low profile red dot scope recommended
- Back up rear sight for reference aiming
For more information, visit strikeindustries.com.
Survival Grips
Survival Grips offers vertical foregrips with finger holes for a secure hold on the weapon. The center section of the grip detaches and can be used like a set of brass knuckles. It attached to any Picatinny-style rail and comes in either a spiked fingerguard or a non-spiked version.
- Grip-Polycarbonate, Finger Guard-Aircraft Grade Aluminum 6061-T6 Black Anodized
- Rail Mount – Accommodates Mil-STD-1913 or Picatinny Rail
- Grip Design-Patent Pending
For more information, visit survivalgrips.com or call 800-745-2205.
TAPCO Smooth Side Mag
TAPCO’s AK-47 smooth-side, low-drag 30-round magazine is made of reinforced composite material with a heavy-duty spring and an anti-tilt follower. The smooth sides allow for fast removal from magazine pouches. The magazines are compatible with most AK platforms.
- MSRP 14.99
- Designed in the spirit of the original Bulgarian steel magazine for use with the AK-47
- Holds 30 rounds of 7.62 x 39mm ammunition
- Made from high strength glass filled nylon
- Dependable feeding
- Anti-tilt follower
- Double stack
- Heavy duty spring
- Counts as 3 922r compliance parts (body, floorplate, follower)
For more information, visit tapco.com or call 800-554-1445.
Vltor Halo 74 Adaptor
Vltor’s new Halo 74 adapts the popular Gemtech Halo suppressor to AK-style weapons with a 24mm x 1.5mm threaded muzzle. The two-piece stainless steel adaptor is compatible with AK-style rifles, including the AK-74 and the AK-74SU Krinkov. All edges are rounded and flat surfaces are knurled to aid in assembly.
- Weight: 5.0 oz (with nut and spacer)
- Nut length: 2.095 inches
- Nut width: 1.500 inches (knurled area)
- Simple to install
- Lightweight
- All edges are rounded and flat surfaces are knurled to aid in assembly
- Stainless steel construction
- Two piece design
For more information, visit vltor.com or call 520-408-1944.
To learn more about these 20 new AK accessories for 2014, please click below:
- Ace AKFX Skeleton Stock
- Archangel OPFOR AK Pistol Grip
- Buffer Technologies AK Buffer
- Century SB-47 Stabilizing Brace
- FAB Defense AGR-47 Grip
- FAB Defense Ultimag AK 10R
- FosTech Bumpski Stock
- GG&G AK Quick Detach Scope Mount
- GM Gear AK-47 Quad Rail
- GuntecUSA Saiga M4 Stock
- Hawke Laser/Light Foregrip
- Magpul PMAG 30 AK/AKM MOE
- MFT Engage EPG47 Pistol Grip
- MFT Engage EPGI47 Grip with Interchangeable Backstraps
- Midwest Industries AK-SSK KeyMod Handguard
- Stark SE-1 AK Grip
- Strike Industries AK Rear Sight Rail
- Survival Grips
- TAPCO Smooth Side Mag
- Vltor Halo 74 Adaptor
